 |
CALogix Modular Logic and Process Control |
Temperature Control
Applications Notes
All West Controllers
All CAL Controllers
Now automate your system without the expense and complication of a PLC. CALogix makes the job as easy as putting in a temperature controller. Add push buttons, timers, on delay, off delay, safety switches...it's all there with CALogix.
|
|
||
| Specification - CALogix |
||
Thermocouple types: |
||
| 9 types: | B,E,J,K,L,N,R,S,T | |
| Standards: | IEC 584-1 | |
| CJC rejection: | 30:1 typical | |
| External resistance: | 100 ohms maximum | |
| RTD Inputs: | 2 or 3 wire IEC 751 (100ohms 0°C/138.5ohms 100°C Pt) | |
| Bulb Current | 0.2mA maximum | |
Linear Process Inputs: |
||
| Linear Input | Range | Typical Accuracy |
| 0-50mV | +/- 0.00 - 99.99, +/- 100.00 - 499.95, +/- 500.00 - 999.99, +/- 1000.00 - 9999.99 |
+/- 0.1% |
| 4-20mA | As above | +/- 0.1% |
| 0-5V | As above | +/- 0.1% |
| 0-10V | As above | +/- 0.1% |
Applicable to all inputs |
(SM = Sensor maximum) | |
| Calibration Accuracy | +/- 0.1% FS typical +/- 1°C | |
| Sampling Frequency | Input 10Hz, CJC 4sec | |
| Common mode rejection | Negligible effect up to 140dB, 240, 40-60Hz | |
| Temperature coefficient | 50ppm/°C SM typical | |
Output devices |
||
| Solid state relay driver: SSd1 and SSd2 |
12Vdc +10/-15% 20mA | |
| Miniature power relay: Rly1, Rly2, Rly3 |
2A/250ac resistive load, form A/SPST |
|
| Analogue Output | 4-20mA 500ohms max +/- 0.1% fs typical 0-5Vdc 10mA 500ohms max +/- 0.1% fs typical 0-10Vdc 10mA 1Kohms max +/- 0.1% fs typical |
|
Logic I/O Module specifications |
||
| Input Range | 0-5/0-10/0-24VDC s/w select | |
| Outputs SSd1 and SSd2 Rly1, Rly2, Rly3 |
12Vdc +10/-15% 20mA 2A/250ac resistive load, form A/SPST |
|
| Maximum counter input frequency | 1 fast 1KHz, Other 10Hz | |
Environmental |
||
| Safety | EN61010, UL873, CSA22.2 No 1010-1 |
|
| Installation | Categories I and II | |
| Pollution | Degree II | |
| EMC Emission | EN61000-6-3 | |
| EMC Immunity | EN6100-6-2 | |
| Moldings | Flame retardant polycarbonate | |
Supply |
||
| Supply Voltage | 18 - 30 VDC 7watts +/-10% fluctuation allowed | |
Details and Spex Installation Manual
