 |
Transmitters |
Analog Transmitters are used
to send signals from one analog source to another. Transmitters are
generally used to signal condition, linearize or isolate the input signal.
Most of our transmitters provide a 4- 20 mA output. We also carry digital
transmitters. Please contact us for additional information.
The following are
some examples of transmitters offered by Advanced Industrial Systems, Inc.
|
 |
TX IsoPack
TxIsoPack -
USB is a fully isolated 4 to 20 mA two-wire loop
powered temperature transmitter for in-head assembly. The TxConfig
can be downloaded free from the Novus website.
Complete sensor type selection and range configuration is achieved by
connecting the device directly to a PC USB port thus not requiring any
other interface, special converter or any additional drivers. The
isolated and linearized current output represents the sensor input
signal according to the temperature sensor selected. Also
available with Hart Protocol. 1000V isolation. Approx price
$ 149.00 for standard version. $ 189.00 for Hart Protocol version.
http://www.novus.com.br/catalogos/?ID=501513 - TxIsoPack
http://www.novus.com.br/catalogos/?ID=238274 - Hart
|
|
 |
TxIsoRail
Similar to the above except DIN rail mounted.
$ 149.00 Standard/$ 235.00 Hart.
http://www.novus.com.br/catalogos/?ID=806373 - TxIsoRail
http://www.novus.com.br/catalogos/?ID=238274 - Hart
|
 |
Thermistor Transmitter
and non-Linear devices.
PR-5343
- Designed for
non-Linear Inputs such as
Thermistors.
- Provides Linearization for 2252 ohm YSI B
Curve Thermistors and probes along with other non-Linear devices.
(400 Series Transmitters)
- 4 - 20 mA output
- Converts non-linear inputs to a
linear output
- Custom Curves Available
- Head of DIN Rail Mounted (with
optional adapter)
- Approx price $ 199.00
|
 |
Loop Powered Loop Isolators
TxIsoLoop-1 & TxIsoLoop-2
Loop
isolators provide signal protection by electrically isolating the input
signal from the output.
TxIsoLoop-1 and TxIsoLoop-2 simplify your application and avoid the
undesirable ground loops by providing single and dual loop galvanic
isolation. The 4-20 mA input is measured and an identical isolated
signal is reproduced at the output. Power is drawn from the 4-20 mA
input loop, thus no auxiliary power or an external power supply is need.
Approx price Single - $ 126.00 Dual $
224.00
http://www.novus.com.br/catalogos/?ID=739150
|
 |
Laurel QLS
Quad Loop Splitter
- Accepts a 4-20 mA, 1-5V, 0-5V or 0-10V input
signal.
- Drives four (4) independent 4-20 mA outputs
proportional to input.
- Outputs can share a common ground.
- Grounds of input and outputs can differ up to
±10V.
- Opening any output loop does not affect other
loops.
- ±10% zero and span fine adjustments for each
output loop.
- Loop current test point for each output, where
200 mV = 20 mA
- Indicator LED for each connected output.
- Powered by 85-264 Vac (Model QLS-1) or 10-48 Vdc
(Model QLS-2).
- Powers a 2- or 3-wire input transmitter at 24V
with up to 30 mA.
- 22.5 mm (0.9") wide case snaps to 35 mm DIN
rail.
- Weighs only 159 g (5.6 oz).
Approx price: $ 200.00
Add $ 30 for Low Voltage Version
|
Transmitter, Analog Transmitter, Temperature Transmitter, TC Transmitter, RTD
Transmitter. Thermistor Transmitter. Non-Linear Transmitter, nonLinear
Transmitter, Linearizing Transmitter, 4-20 mA Transmitter, Advanced Industrial Systems, TC Transmitter, RTD Transmitter.
Thermistor Transmitter. Non-Linear Transmitter, nonLinear Transmitter, Loop Isolator, Loop Splitter, DIN Transmitter
Linearizing Transmitter, Advanced Industrial Systems
|
