|
SP401 Printer
|
|
|
|
SP-401
(Acculex DPP410)
|
| Panel
Mount Thermal Printer |
|
|
The DPP-410 is a full-featured, thermal
dot-matrix panel mount printer. The DPP-410 prints 40 columns per
line using 5x7 dots per character, or, in Double Wide mode, prints
20 columns per line, using 10x7 dots per character. A control code
enables/disables Double Wide printing. The printer provides a
standard USA 96 ASCII character set with 7 alternate character sets
for other countries. A 7000 character buffer is standard. TEXT or
DATA print mode is selectable by jumper. The DATA mode inverts the
character orientation, a useful feature for data logging
applications.
Either serial (RS-232) or parallel interfaces are available. The
serial version has a fully bi-directional serial port with DIP
switch selectable baud rates from 50 to 19.2K with full support for
stop bits, character length, and parity checking. The parallel
interface is 8-bit Centronics compatible.
Connectors on the rear allow use of either 8-22VAC or 8-30VDC power.
A wall adapter, which converts 115VAC to 12VAC, is available.
A built-in self test can be initiated using
the front panel switch (turn on and hold in paper advance position).
An LED indicates when paper is out.
These printers compact size, light weight, and low power
consumption make them suitable for a wide range of laboratory and
portable instrumentation applications.
Please note that, for highest quality output and maximum head life,
users should employ premium quality thermal paper. One roll of paper
is included. |
|
|
|
Features
|
Thermal/dot matrix printer
40 column width
96 printable characters
Microprocessor-based controller
Compact size - 2.7 H x 4.5 W x 5.7 D
Serial or parallel interface
Selectable baud rate
Choice of power - 12VDC, 12VAC, or 115VAC
Paper out LED
Self-test function
|
|
|
|
Technical Notes
|
1. There is no low-paper indicator. LED
red means out of paper. The paper status is not communicated by the
program interface to the host computer.
2. A null modem is required for connection of the serial interface
printer to a host computer. Note that the printer busy signal is on
connector pin 11.
3. Graphics mode allows printing dot-addressable graphics, with some
restrictions. See user manual for details.
4. International character set selections (USA, Japan, France,
Germany, UK, Sweden, and Italy ) are made via ESC sequence sent to
the printer.
5. Time/date stamping requires initialization of time and date
values by ESC sequence.
6. For the DPP-210 printer (which prints 20 columns per line) please
call. |
|
|
|
Specifications
|
|
General |
|
Number of Columns |
40 (or 20 in double-wide print mode)
|
|
Font/Dot Matrix |
5x7 (or 10x7 in double-wide print
mode) |
|
Line Density |
6.7 line/inch |
|
Print Modes |
DATA (inverted) or TEXT (jumper
selectable) |
|
Dot Diameter |
0.014 (0.35mm) |
|
Dot Spacing |
0.014 (.35mm) vertical 0.010
(0.25mm) horizontal |
|
Line Spacing |
0.060 (1.5mm) |
|
Std. Character Set |
USA (96 characters) |
|
Opt. Character Sets |
France, Germany, Italy, Japan,
Sweden, UK |
|
Performance |
|
Max Print Rate |
0.5 lines/s |
|
Print Head Life |
500,000 character lines
|
|
Buffer Size |
7000 characters |
|
Interface |
|
Serial |
RS-232, DB25S connector
|
|
Parallel |
8-bit Centronics compatible, DB25S
connector |
|
Power |
|
| |
8-22VAC or 8-30VDC (115VAC adapter
provided) |
| |
2.5 watts standby, 12 watts printing
|
|
Environmental |
|
Operating Temp |
0 to 50°C |
|
Storage Temp |
-20 to 60°C |
|
Humidity |
90% max RH (non condensing)
|
|
Physical |
|
Dimensions |
2.7 H x 4.5 W x 5.7 D (68.6 x
114.3 x 144.8mm) |
|
Paper |
Roll stock - 80ft roll |
|
Paper Width |
3.15 (80mm) |
|
Paper Thickness |
0.0031 (.0079mm) |
|
Weight |
2.25lb (1.02kg) |
| |
|
|
|
|
Part Number |
1-24 pcs |
25-up pcs |
|
SP-401S (Serial Interface) |
$825.00 |
$720.00 |
|
SP-401P (Parallel Interface) |
$825.00 |
$720.00 |
|
SPR-400 (Paper) |
$ 8.95 |
$5.95 |
For additional pricing information call 800-532-2477.
|
|
