Partlow MRC 8000

12" Recorder / Controller

 

 

 

RIM M100 Encoder Tester  
  • 2 large displays - Allows you to see critical process values at the same time.
  • 12 inch chart offering high resolution of recorder process variables.
  • Easy to use - All programming done from a simple keypad.
  • Reliability - Maintenance free recording for years to come.

 
Standard Features
Modes: Digital; record or controller functionality.
Display: Two 4-digit digital displays: 0.56½ high, red, seven segment LED; 3 button keypad; automatic and decimal point positioning.
Status Indicators: Red LEDs for ALRM1/ALRM2 (Recorders); yellow, red LEDs MAN, OUT1/OUT2, ALRM.
Chart: 10½ circular chart; 100 charts furnished with each instrument. Unless otherwise specified, charts shipped with instrument are 0–100 range. 24 hour rotation default setting.
Chart Drive: DC Stepper Motor.
Chart Rotation: User configurable from 0.1 and 999.9 hours per revolution.
Chart Range: Bottom and top of span –9999 to 9999 units.
Pen Type: One or two disposable fiber tip pen.
Pen Color: Pen 1 (red); Pen 2 (green).
Memory Backup: Battery backed SRAM; 5 year minimum life.
Construction/Enclosure: Gasketed cover, case and windows. Structural foam case and cover with plastic or glass window area.

 
Operating Characteristics
Operating Temp: 32° to 122°F (0° to 50°C).
Storage Temp: –40° to 149°F (–40° to 65°C).
Humidity: 0% to 90% non-condensing R.H.
Vibration: 0.5 to 100Hz @ 0.2g.

 
Electrical
Power Consumption: 25VA max.
Line Voltage: 115V or 230VAC ±10%, 50–60Hz.

 
Inputs
Thermocouple: J, K, T, R, S, E, B, N, C.
RTD: 100 ohm, platinum; 0.00385 ohms/ohm/°C
RTD Excitation Current: 330 microamps, typical.
DC Voltage: 0–25mV, 0–50mV, 10–50mV, 0–5V, 1–5V.
DC Current: 4–20mA or 0–20mA used with appropriate external shunt resistor.
Remote Setpoint Input: 0–5VDC, 1–5VDC, 4–20mA, or 0–20mA with shunt resistor.

 
Outputs
Control Outputs
ON/OFF: Assignable to alarm and control outputs.
Relay: SPDT; 115VAC 5.0A resistive, 1/8HP, 230VAC, 230VAC 2.5A resistive, 1/8HP, 250VA.
SSR Driver: Open collector output; short circuit protected @ 100mA max; provides 4VDC @ 20mA or 3VDC @ 40mA.
Current: Assignable to process value or setpoint transmission or control outputs; 0–20mA or 4–20mA nominal output span; 650 ohm
Alarm/Event Outputs (options)
Number: Up to two process alarms for each of two inputs. Type: Process high/low (recorder); process, deviation and band (controller).
Relay: SPDT: 115VAC 5.0A resistive, 1/8HP, 230VAC; 230VAC 2.5A resistive, 1/8HP, 250VA.
SSR Driver: Open collector output; short circuit protected @ 100mA max; provides 4VDC @ 20mA or 3VDC @ 40mA.
Process Alarm: Direct (High) or Reverse (Low) –9999 to 9999 units.
Deviation Alarm: Direct (deviation above setpoint) or Reverse (deviation below setpoint) –3000 to 3000 units.
Deviation Band Alarm: Open or closed 1 to 3000 units.
Alarm Hysteresis: 0–300 units.

 
Performance
General
Input Measurement Error: Type J, K, T, E, N, C, T/C and RTD ±0.25% of reading plus 1 degree @ 25°C; Type R, S, B, C, T/C
Ambient Temperature Error: 0.04% of span per degree C deviation from 25°C.
Cold Junction Compensation Error: ±0.2% @ 25°C.
Cold Junction Compensation Rejection: 0.04% deviation from 25°C.
Linearization Error: TCs: ±0.25°C typical; ±0.5°C worst case with exceptions;
RTDs: ±0.1°C typical; ±0.3°C worst case.
Noise Rejection: Common Mode Rejection: 90dB minimum; 24VAC maximum for RTD input; 115VAC max for other inputs;
Normal Mode Rejection: 85dB minimum @ 60Hz or greater.
 
Isolation: N/A.
Chart Accuracy: Recording: 0.5% of span.
Chart Rotation: ±0.5% or rotation time..
Chart Accuracy: Recording: 0.5% of span.
Chart Rotation: ±0.5% or rotation time.
Resolution: 0.15% of chart span.
Dead Band: 0.3% of chart span.
Process Value Output Error Limit: N/A.
Record Error Limit: N/A.
Control Parameters
Proportional Band Output 1/Output 2: 1 to 3000 units.
Manual Reset (Integral): –1500 to 1500 units.
Auto Reset (Integral): 0–100 repeats/minute.
Rate Derivative: 0–10 minutes.
Cycle Time Output 1/Output 2: 1–240 seconds.
Position Proportioning Sensitivity: 0.0–50.0%.
ON/OFF Hysteresis: 0–300 units (width of hysteresis band).
First /Second Output Position: –1000 to 1000 units.
Control Action: Direct or reverse.
Automatic Transfer Function: User-selectable to transfer from manual to automatic control when setpoint is reached; can be disabled.
Anti-Reset Windup: Auto-reset is disabled when the process is outside of the proportional band.
Auto/Manual: Bumpless transfer.
Manual Output: 0–100%.
Output Limiting: High/Low 0–100%.
Setpoint Limiting: High/Low limit: –9999 to 9999 units.

 
Communications Interfaces
Communications Port: RS–485 serial, half duplex.
Protocol: Per ASCII and ANSI X3.28 subcategories 2.5 & A4.
Bit Rate: User configurable; 300, 600, 1200, 2400, 4800 or 9600/sec.
Configuration: Monitor: Read only.
Normal: Read and write.

 
Ratings/Agency Approvals
Safety: UL 1092/916 and QUXY File E67237; CSA Spec 142 File E67237; CE EN60010–1 1993/1995.
Immunity: CE EN50082-1:1992
Emissions: CE EN55022:1987 Class A.
Limit Device: N/A
Other: ISO 9002 registered.

 
Protection
NEMA 3 standard; NEMA 4 optional; CE compliance optional.

 
Physical Dimensions
Width: 14.12" (359mm).
Depth: 7.75" (197mm).
Height: 16.77" (426mm).
Weight: 20 lbs (9.1kg).
Mounting/Mounting Position: Panel or wall.

 
Options/Accessories
  • Plastic or glass window option.
  • 24V DC transmitter power supply option.
  • Door lock option.
  • NEMA 4 protection option; CE compliance option.
  • 5A relay output option.
  • Remote setpoint/position proportioning option.
  • RS-485 communication option.
  • 115 or 230VAC input option.
  • Door lock and sealed conduit/connector option.

 
Warranty: 3 years.
Base Price: $ 1172.00

Partlow Manuals
Applications Notes 

 
Name
Company
Address
City, State, Zip
Country
Phone Number
Fax Number
E-Mail
Comments
 
Home Page      Site Index      Contact Us      Applications Notes and Tables      Products      Manuals      On Line Order
Advanced Industrial Systems, Inc.
1-800-532-2477         Fax:  1-502-228-0127       Sales@AdvIndSys.com

American Express

Visa

Mastercard

Discover
Copyright 1997 - 2010 Advanced Industrial Systems, Inc. All rights reserved.
Last modified: Thursday May 13, 2010.