Partlow MRC 9400

RIM M100 Encoder Tester

Data integrity - Unalterable recorded data of up to 4 process variables in 4 colors.
Out of the box operation for most typical applications.
EZ setup for customized applications.

Standard Features
Modes:	Digital; Record
Display:	Two line, 40 character vacuum fluorescent display with 0.21½ (5mm) high characters; 15 keys for programming and unit operation; display modes; automatic or manual sequencing; 3 display formats.
Status Indicators:	8 red LED alarm status indicators; real time clock for time and date stamping on chart output.
Chart:	10–12½ circular chart; 100 charts furnished with each instrument. Unless otherwise specified, charts shipped with instrument are in 100 divisions.
Chart Rotation:	User configurable 8, 12, 24 or 48 hrs or 7 days.
Chart Range:	Bottom and top of span –999999 to 999999 units.
Pen Type:	Disposable 4 pen fiber tip marker assembly.
Pen Color:	Pen 1 (red); Pen 2 (green); Pen 3 (blue); Pen 4 (black).
Memory Backup:	EEPROM and battery backed SRAM; 5 year minimum life.
Construction/Enclosure:	Gasketed, cover, case and windows. Structural foam case and cover; optional door lock or glass window option.

Operating Characteristics
Operating Temp:	32° to 122°F (0° to 50°C).
Storage Temp:	–40° to 149°F (–40° to 65°C).
Humidity:	10% to 90% non–condensing R.H.
Vibration:	0.5 to 100Hz @ 0.2g.
Electro Static Discharge:	No effect from 5000V static charge over the entire area.

Electrical
Power Consumption:	60VA max.
Line Voltage:	85–265VAC 50/60Hz..

Inputs
Thermocouple:	J, K, T, R, S, E, B, N, G, D, C, Ni/Ni-Moly and Platinel II.
RTD:	100 ohm platinum, 2 or 3 wire; 0.00385 ohms/ohm/°C or 0.00392/ohms/ohm/°C.
RTD Excitation Current:	1mA.
DC Voltage:	0 to 25mV, 0 to 100mV, 0 to 1V, 0 to 10V.
DC Current:	0–20mA or 4–20mA.
Impedance:	25mV, 100mV, 1V > 10 megohms, 10V > 50 kohms, mA: 50 ohms.

Outputs
Alarm (Options)
Number:	Up to 2 alarms for each of four process variables; Type: process high/low.
Relay:	SPDT; 5A resistive @ 115VAC, 2.5A resistive @ 230VAC.
Process Alarm:	Direct (High) or Reverse (Low).
Alarm Hysteresis:	Fully adjustable.
Retransmission:	0–20mA or 4–20mA nominal into 650 ohm load map.

Performance
Input Measurement Error:	±0.25% of measurement span reference accuracy.
Ambient Temperature Error:	0.01% of span per degree C deviation from 25°C.
Cold Junction Compensation Error:	±0.2% @ 25°C.
Cold Junction Compensation Rejection:	0 ±0.4°C from 25°C.
Linearization Error:	TCs: ±0.25°C typical; ±0.5°C worst case with exceptions. RTDs: ±0.1°C typical; ±0.3°C worst case.
Noise Rejection:	Normal Mode: 100dB minimum at 60Hz or greater. Common mode: 120dB minimum at 115VAC maximum.
Isolation:	500VDC/350VAC.
Scan Rate:	2 scans/second; scan rate is programmable for each input with the limitation that a total of 16 measurements can be made in one second.
Chart Accuracy:	Recording: 0.3% of span. Chart Rotation: ±0.2 minutes for a 24 hour rotation, assuming all backlash removed, 6–9999 hours per revolution.
Sensor Fault Detection:	Sensor break on all temperature controls, RTDs, 1 volt, 1 to 5 volt, 4–20mA, and millivolt inputs. Sensor high or low on all inputs, 5% above or below range.
Transmitter Power Supply:	Up to 4 isolated 25mA @ 24VDC supplies available.
Data Backup:	EEPROM for input board and motherboard calibration data; battery backed SRAM for configuration data.

Communications Interfaces
Communications Port:	RS-232/485 serial, half duplex.
Protocol:	Modbus RTU.
Bit Rate:	User-configurable 1200, 2400, 4800, 9600 baud.
Address:	User-configurable, 1–247.

Ratings/Agency Approvals
Safety:	UL 1092, UL916 and QUXY File E67237; CSA Spec 142 File 67237; CE EN60010–1 1993/1995.
Immunity:	CE compliance EN50082-2.
Emissions:	CE compliance EN50081-1; EN55022 Class A.
Hazardous Location:	ETL Listed Class 1 & II Division 2 and Class III, Division 1 & 2 Ref 56042.
Other:	ISO 9002 registered.

Protection

NEMA 3 optional

Physical Dimensions
Width:	14.12" (359mm).
Depth:	7.75" (197mm).
Height:	16.77" (426mm).
Weight:	25 lbs (9.1kg).
Mounting/Mounting Position:	Panel or wall.

Options/Accessories

Diverse pen options (see config matrix for details).
Choose from up to 4 input options (see config matrix for details).
Totalizer option.
NEMA 4 protection optional.
Diverse window and door lock options.
RS-232/485 communication option.

Warranty: 2 years.

Base Price: $ 1723.00

Partlow Manuals
Applications Notes

Home Page Site Index Contact Us Applications Notes and Tables Products Manuals On Line Order

Advanced Industrial Systems, Inc.

1-800-532-2477 Fax: 1-502-228-0127 Sales@AdvIndSys.com

Copyright 1997 - 2010 Advanced Industrial Systems, Inc. All rights reserved.
Last modified: Thursday May 13, 2010.